Updated Nov 18, 2026· 7 min read

Key takeaways

  • To read a welding symbol chart, find the reference line first, then look at which side of that line the weld symbol sits.

As an Amazon Associate I earn from qualifying purchases. This post may contain affiliate links at no extra cost to you.

To read a welding symbol chart, find the reference line first, then look at which side of that line the weld symbol sits, since that tells you whether the weld goes on the arrow side or the other side of the joint. After that, read the numbers and notes around the symbol for size, length, spacing and any extra instructions in the tail.

A welding symbol packs a lot of information into a few lines, and it looks cryptic until you learn the layout. The conventions come from the American Welding Society standard for symbols, which most North American drawings follow, though shop practice and older prints can differ. This guide breaks the symbol into parts, shows how to read it in order and lists mistakes that trip up beginners.

What we cover
  1. The Anatomy of a Welding Symbol
  2. Reading Order, Step by Step
  3. Common Weld Symbols at a Glance
  4. Why the Symbol System Exists
  5. A Worked Reading Example
  6. Practice and Study Tips
  7. Before You Start Reading a Print
  8. Common Mistakes
  9. Related guides
  10. Frequently Asked Questions

The Anatomy of a Welding Symbol

Every welding symbol is built around a horizontal reference line. An arrow extends from one end of that line and points to the joint. A tail may extend from the other end, and it holds notes such as the welding process, a specification or a special instruction. The weld symbol itself, a small shape that shows the type of weld, sits on the reference line.

Three details change the meaning of the whole symbol: which side of the line the weld symbol sits on, whether a flag or circle is attached at the arrow’s bend, and whether any dimensions appear to the left or right of the weld symbol. Learn those three and most symbols make sense.

Reading Order, Step by Step

Start at the Arrow

The arrow points to the joint. The side of the joint the arrow touches is called the arrow side, and the opposite side is the other side. This is the anchor for everything else on the symbol.

Check the Side of the Reference Line

If the weld symbol sits below the reference line, the weld goes on the arrow side of the joint. If it sits above the line, the weld goes on the other side. A symbol that appears on both sides of the line means a weld on both sides.

Read the Dimensions

Size information appears to the left of the weld symbol. Length and pitch, which is the center-to-center spacing, appear to the right. When no length is shown, the weld usually runs the full length of the joint unless the drawing says otherwise. Always confirm the units on the drawing.

Check the Supplementary Symbols and the Tail

Beyond the main symbol, small additions refine the weld. A small circle at the bend of the reference line means weld all around. A flag means the weld is made in the field, not in the shop. Notes in the tail can name a process, a procedure or a specification that applies to the weld.

Common Weld Symbols at a Glance

Symbol shape Weld type What it generally means
Right triangle Fillet weld A weld in the corner where two surfaces meet at an angle
Two parallel vertical lines Square groove Edges are butted together with little or no bevel
V shape V-groove Both pieces are beveled to form a V
Bevel shape Bevel groove One piece is beveled and the other stays square
U shape U-groove Curved groove for thick sections
Rectangle on the line Plug or slot weld Weld fills a hole or slot in one member
Open circle at the bend Weld all around The weld goes around the full joint
Flag at the bend Field weld Weld is made on site

Treat this chart as a memory aid and check the full standard or your project’s drawing notes for details such as groove angles, root openings and finish symbols.

Why the Symbol System Exists

A drawing cannot describe every weld in words without becoming cluttered, so designers use symbols to say what to weld, where, how big and how long. A fabricator who reads them correctly builds the part as intended; one who misreads them can leave out a weld, put it on the wrong face or make it too small. That is why shops treat symbol reading as a basic skill alongside measuring and fit-up.

Symbols also keep the design separate from the method. The drawing says what the joint needs, while the procedure and the welder decide how to make it. Keeping that split in mind explains why the tail often points to a separate document rather than spelling out amperage or technique.

A Worked Reading Example

Picture a symbol with the arrow touching a corner joint, a triangle under the reference line, the number 1/4 to the left of the triangle and a flag at the bend. Reading in order: the weld is a fillet, it is on the arrow side, its size is a quarter of an inch, and it is made in the field. If a length and pitch such as 2-6 sat to the right of the triangle, the weld would be two units long with a center-to-center spacing of six units.

Now imagine the same triangle also appeared above the line. That would mean a matching fillet on the other side of the joint, so the joint is welded from both sides. Working through a few of these on scrap drawings builds confidence quickly. Try adding a weld-all-around circle next, then move to a groove symbol, and notice how each added element changes the reading without changing the order you follow.

Practice and Study Tips

Make a small set of flash cards with the weld symbols you meet most often. Sketch a joint, add a symbol, then reverse the process and describe the weld in words. Comparing your reading with a colleague or an instructor catches slips before they reach the shop floor, which is worth doing in 2026 as much as ever. Keep a printed copy of the symbol chart at your bench until the common shapes feel automatic, and annotate it with your own sketches of the joints each symbol describes.

Before You Start Reading a Print

  • Confirm which standard the drawing follows and whether notes override the chart.
  • Find the arrow side and the other side of the joint.
  • Check units and any general notes on the drawing.
  • Look for supplementary symbols such as the all-around circle and the field flag.
  • Ask the engineer or inspector when anything is unclear before you strike an arc.

Common Mistakes

The most frequent error is flipping the sides: placing the weld on the arrow side when the symbol sits above the line. Close behind is mixing up the location of size and length, remembering that size sits to the left and length and pitch to the right. A third trap is missing a flag or circle, which changes where and how the weld is made.

Also watch for symbols that call out a specific weld procedure in the tail. Following the drawing and the procedure keeps the work consistent with what the designer intended, and structural or code work belongs under the supervision of qualified personnel.

Related guides

Frequently Asked Questions

What does the tail of a welding symbol contain?

The tail holds notes such as the welding process, the specification or a procedure reference. If the tail is missing, no extra instruction is given on the symbol itself.

What is the difference between arrow side and other side?

The arrow side is the side of the joint the arrow touches. The other side is the opposite face, and the weld symbol’s position above or below the reference line indicates which side gets the weld.

Do all drawings use the same welding symbol system?

No. Many North American prints follow the American Welding Society convention, while other regions use different standards. Check the drawing notes before assuming a meaning, and ask which edition of the standard the job uses, because small details have changed between editions.

What does a weld with no length mean?

Usually that the weld runs the full length of the joint, unless the drawing notes say otherwise. If you are unsure, confirm with the designer before welding. A short question is cheaper than rework on a finished assembly.

H
Hoodlum Welding Editorial Team
We compare specs, warranty terms, long-term owner feedback and street pricing before anything earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.

Related guides

Browse all Guides guides →

More from Amazon

Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.

Amazon Business

A free business account with business pricing and bulk-buying tools for work, shop or home office.

Create a business account
Amazon Prime

Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.

Start a Prime free trial
Audible

Audiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.

Try Audible free
Amazon Music Unlimited

Ad-free music streaming. Eligible new subscribers can start with a free trial.

Try Music Unlimited free

As an Amazon Associate we earn from qualifying purchases.