Updated Nov 18, 2026· 10 min read

Key takeaways

  • Compare the best stud welders for dent pulling by published power, included stud sizes, kit contents, and pulling tools across gun kits and bench machines.

As an Amazon Associate I earn from qualifying purchases. This post may contain affiliate links at no extra cost to you.

A stud welder bonds a small steel pin, washer, or pad to a dented panel so a slide hammer or pulling tool can draw the metal back out. The five kits below cover the two formats sold for this work: compact gun kits that weld studs through a handheld gun, and bench machines that weld studs, washers, wavy wire, and carbon rods through selectable modes. Every pick is compared on published specifications only, including rated output, stud sizes in the box, and included pulling accessories.

As an Amazon Associate, we earn from qualifying purchases.

What we cover
  1. Quick Answer
  2. Table of Contents
  3. How Compared
  4. VEVOR Stud Welder Kit 5500 With Pulling Hammer
  5. VEVOR Stud Welder Kit 4550 With Storage Case
  6. VEVOR G90E 110V Spot Welder Dent Puller Machine
  7. ECILKUC G90E Panel Spot Puller With Dual Guns
  8. PLAYOCCAR 220V PRO Spot Welder Dent Puller Machine
  9. Gun Kits Versus Bench Machines
  10. How to Choose
  11. Care and Maintenance
  12. FAQ
  13. Conclusion

Quick Answer

For a complete gun kit with the widest mix of included media, the VEVOR Stud Welder Kit 5500 pairs a published 1600A maximum output with two stud sizes and a pulling hammer. For the lightest published package, the VEVOR Stud Welder Kit 4550 covers the same 1600A class in a 21 lb case. For heavier panel work, the VEVOR G90E publishes 3 KW of input power, a 3500A instantaneous maximum output, and seven modes on 110V, while the ECILKUC G90E matches the 3 KW class with a dual gun interface. The PLAYOCCAR 220V PRO is the only 220V machine here, with a published 3500W rating and six modes.

Product Format Published output Modes Pulling tool included Tier
VEVOR Stud Welder Kit 4550 Gun kit 1600A max, 800 VA Single function Pull hammer, 17 in Budget
VEVOR Stud Welder Kit 5500 Gun kit 1600A max, 800 VA Single function Pulling hammer Mid-range
PLAYOCCAR 220V PRO Bench machine 3500W rated 6 modes Welding gun system Mid-range
ECILKUC G90E Panel Spot Puller Bench machine 3 KW output 7 modes Slide hammer puller Premium
VEVOR G90E Spot Welder Dent Puller Bench machine 3 KW input, 3500A max 7 modes Slide hammer Premium

Table of Contents

  • Quick Answer
  • How Compared
  • VEVOR 5500 Gun Kit
  • VEVOR 4550 Gun Kit
  • VEVOR G90E Bench Machine
  • ECILKUC G90E Bench Machine
  • PLAYOCCAR 220V PRO Bench Machine
  • Gun Kits Versus Bench Machines
  • How to Choose
  • Care and Maintenance
  • FAQ
  • Conclusion
  • Product and ASIN Reference

How Compared

Each kit was compared on the figures and contents its maker publishes, using four axes. The first is published power: maximum output current and transformer or input power ratings, taken from specification sections rather than headline copy. The second is the pulling media in the box: stud counts and diameters for the gun kits, and washer, wavy wire, and electrode sets for the bench machines. The third is the pulling hardware included, such as a slide hammer, pull hammer, hooks, and claws. The fourth is input voltage, because two machines here need circuits that differ from a standard household outlet. Tiers are labeled budget, mid-range, and premium to reflect kit scope and published capability.

VEVOR Stud Welder Kit 5500 With Pulling Hammer

Check price on Amazon

This gun kit is listed under the Bestauto brand in the VEVOR family and is built around a single handheld stud gun fed by an 800 VA transformer. The published maximum output is 1600A on a 110V input, and thermal protection trips at 95 degrees C. The kit stands out for media count: 500 nails in 2.5 mm and 500 nails in 2.0 mm, so both common stud diameters are covered without a separate consumable order. Pads widen the pulling options, with 50 meson pads and 50 straight pads, plus a wavy wire electrode and 20 wavy wires for crease work. Pulling is handled by the included multifunctional pulling hammer. The specifications field gives an item weight of 28.5 lb, the heavier of the two gun kits here.

Specs

  • Model: Stud Welder Dent Repair Kit 5500
  • Input voltage: 110V
  • Transformer rating: 800 VA
  • Maximum output current: 1600A
  • Thermal protection: trips at 95 degrees C
  • Studs: 500 nails at 2.5 mm, 500 nails at 2.0 mm
  • Pads: 50 meson pads, 50 straight pads
  • Electrodes: meson, straight pad, wavy wire
  • Wavy wires: 20
  • Pulling tool: multifunctional pulling hammer
  • Item weight: 28.5 lb

VEVOR Stud Welder Kit 4550 With Storage Case

Check price on Amazon

The 4550 is the lighter gun kit here, with a published product weight of 9.5 kg, or 21 lb, in its storage case. It shares the family ratings of its sibling: a 110V input, an 800 VA transformer, and a published maximum current of 1600A, with thermal protection at 95 degrees C. The gun body is published as ABS with a pure copper electrode, and the gun measures 11 by 9 in. Media is narrower than the 5500 kit: 500 studs in a single 2 mm size, held by one stud electrode with internal and external stud locks. The pulling tool is a multifunctional pull hammer, 17 in long. For a shop that pulls mostly shallow door and fender dents with one stud size, the published contents cover the job in the smallest case here.

Specs

  • Model: 4550
  • Input voltage: 110V
  • Transformer rating: 800 VA
  • Maximum current: 1600A
  • Studs: 500 studs at 2 mm
  • Stud electrode: 1, with internal and external stud locks
  • Pulling tool: multifunctional pull hammer, 17 in (43.2 cm)
  • Thermal protection: 95 degrees C (203 degrees F)
  • Gun body: ABS; electrode: pure copper
  • Gun dimensions: 11 x 9 in (28 x 22.8 cm)
  • Product weight: 9.5 kg (21 lb)
  • Case: storage case included

VEVOR G90E 110V Spot Welder Dent Puller Machine

The G90E moves from a single stud gun to a bench machine with a control panel and seven functional modes. Published figures give a 110V input, 3 KW of input power, and an instantaneous maximum output current of 3500A, with automatic and manual contact welding. The published welding thickness range is 0.6 to 1.2 mm, and the listing names carbon steel, stainless steel, and iron as welding materials. The accessory set is the broadest here: an organizer box holding a slide hammer, 10 wiggle wires, stud, carbon rod, and washer collets, 2 carbon rods, a wrench, a puller hook, a puller claw, 10 triangle washers, 10 pulling tabs, 20 round washers, a suction cup with nut, and a user manual. Listing product information gives an item weight of 53.8 lb, so this is a bench unit rather than a carry-around kit.

Specs

  • Model: G90E (90E)
  • Input voltage: 110V
  • Input power: 3 KW
  • Instantaneous maximum output current: 3500A
  • Modes: 7 functional modes
  • Contact welding: automatic and manual
  • Welding thickness: 0.6 to 1.2 mm
  • Welding materials: carbon steel, stainless steel, iron
  • Pulling tool: slide hammer
  • Media: 10 wiggle wires, 10 triangle washers, 10 pulling tabs, 20 round washers, 2 carbon rods
  • Collets and tools: stud, carbon rod, and washer collets, puller hook, puller claw, suction cup, wrench, organizer box
  • Item weight: 53.8 lb

ECILKUC G90E Panel Spot Puller With Dual Guns

Check price on Amazon

The ECILKUC machine is a second take on the G90E class, rated at 3 KW of power output in its published technical specifications. Its control panel offers seven mode selections with an automatic and manual toggle, and the manual highlights a dual gun interface that lets the operator switch between the spot welding gun and pulling tools without reconnecting cables. The package contents published in the manual are complete for panel work: the main unit, a spot welding gun, a slide hammer puller, electrodes covering triangular meson, round meson, and OT meson pulling plus a carbon rod, drawing hooks and washers, a manual sucker, a power cable, and a ground clamp. The maker also publishes a small welding spot approach, with weld spots sized to limit heat transfer to the back of the panel. Published specifications for this model do not include a maximum output current figure, so its case rests on the 3 KW rating, mode count, and contents.

Specs

  • Model: G90E Panel Spot Puller
  • Input voltage: 110V
  • Power output: 3 KW
  • Modes: 7 mode selections
  • Operation: automatic and manual toggle
  • Interface: dual gun interface
  • Pulling tool: slide hammer puller
  • Electrodes: triangular meson, round meson, OT meson, carbon rod
  • Additional contents: spot welding gun, drawing hooks and washers, manual sucker, power cable, ground clamp

PLAYOCCAR 220V PRO Spot Welder Dent Puller Machine

The PLAYOCCAR machine is the electrical outlier in this group: its listing data specifies a 220V input, a 3500W rating, and six welding modes with automatic and manual welding. Shops that already run 220V equipment, such as a MIG welder or a large compressor, can feed this machine from the same class of circuit, while shops with only household outlets cannot. The published item weight is 46.1 lb, lighter than the VEVOR G90E bench machine, and the published package dimensions are 18.7 by 12.5 by 10.75 in. The listing data names the model as 220V PRO, with an item model number of 220V PRO 6Modes, matching the six mode count in the product name. That listing data does not itemize accessory counts the way the other bench machines do, so its published case rests on power, modes, and weight.

Specs

  • Model: 220V PRO
  • Item model number: 220V PRO / 6Modes
  • Input voltage: 220V
  • Rated power: 3500W
  • Welding modes: 6
  • Welding control: automatic and manual
  • Item weight: 46.1 lb
  • Package dimensions: 18.7 x 12.5 x 10.75 in

Gun Kits Versus Bench Machines

The clearest split in this roundup is format. The two gun kits weld studs and pads only, and their published output sits at 1600A through an 800 VA transformer. In exchange, they weigh 21 lb and 28.5 lb in their cases and need only a standard 110V outlet. The three bench machines publish 3 KW class power and maximum output figures up to 3500A, and they add washers, wavy wire, triangle washers, pulling tabs, and carbon rods for shrinking stretched metal. That breadth matters on creased or stretched panels, where a single row of studs cannot pull evenly and heat shrinking may be needed after pulling. The bench machines also weigh more, from 46.1 lb to 53.8 lb, and the PLAYOCCAR unit needs a 220V circuit.

How to Choose

Match the format to the panel work first. Shallow, round dents in doors and fenders need only studs and a hammer, which both gun kits cover. Long creases, stretched metal, and mixed damage call for washers, wavy wire, and carbon rod modes, which only the bench machines publish.

Check the circuit second. Four of the five picks run on 110V, while the PLAYOCCAR machine requires 220V. Confirm the outlet and breaker available at the bench before choosing, and note the 3 KW class power the bench machines publish.

Count the consumables third. The 5500 gun kit publishes 1,000 studs across two diameters plus pads, the 4550 publishes 500 studs in one diameter, and the VEVOR G90E publishes counted washers, tabs, and wires. Counted contents make restocking easier, because the replacement sizes are printed in the listing.

Confirm the panel range fourth. The VEVOR G90E publishes a welding thickness of 0.6 to 1.2 mm and names its welding materials, which suits modern thin body panels. If a listing does not publish a thickness range, treat that as a gap and weigh the machines that do more heavily for thin panel work.

Care and Maintenance

Keep electrodes and collets clean and replace them when the manual calls for it, since a worn electrode face weakens every weld. Wipe metal dust from the vents and control panel after each session, and keep the ventilation openings clear while the machine runs, because the bench units rely on airflow to shed heat. Inspect cables, gun leads, and the ground clamp for cuts or loose connections, and keep the ground contact point on the panel clean and unpainted so welds stay consistent. Store gun kits in their cases and bench accessories in the organizer box, in a dry space away from grinding dust.

FAQ

What stud sizes do these kits use for dent pulling?

The gun kits publish metric stud sizes: the 4550 includes 500 studs at 2 mm, and the 5500 includes 500 studs at 2.0 mm plus 500 at 2.5 mm. The bench machines focus less on studs and publish washer, tab, and wavy wire counts instead, so stud diameter is mainly a gun kit specification.

Can these stud welders work on aluminum panels?

The published material lists here name steel based panels: the VEVOR G90E lists carbon steel, stainless steel, and iron. Aluminum repair uses dedicated equipment and settings beyond what these listings publish, so treat these five picks as steel panel tools unless a maker publishes aluminum capability for the specific model.

What circuit does a bench dent puller machine need?

Four of the five picks run on 110V, including both 3 KW bench machines from VEVOR and ECILKUC. The PLAYOCCAR 220V PRO is the exception and needs a 220V supply of the kind many shops already have for welders and compressors.

How is a welded stud removed after the dent is pulled?

Published kit designs rely on the stud being twisted or clipped off after pulling, then the spot is ground smooth during normal body finishing. The gun kits here use stud locks and collets sized to their published stud diameters, which is why matching replacement studs to the published size matters when restocking.

Conclusion

For most home garages, the VEVOR 5500 gun kit is the balanced pick, with two stud sizes, pads, wavy wire, and a pulling hammer in one package. The VEVOR 4550 covers the same output class in the lightest case for single size stud work. Shops that pull panels daily should look at the 3 KW bench machines: the VEVOR G90E for its counted accessory set and published thickness range, the ECILKUC G90E for its dual gun interface, and the PLAYOCCAR 220V PRO where a 220V circuit is already in place.

H
Hoodlum Welding Editorial Team
We compare specs, warranty terms, long-term owner feedback and street pricing before anything earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.
Best Stud Welders for Auto Body Dent Pulling…Check price on Amazon

Related guides

Browse all Uncategorized guides →

More from Amazon

Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.

Amazon Business

A free business account with business pricing and bulk-buying tools for work, shop or home office.

Create a business account
Amazon Prime

Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.

Start a Prime free trial
Audible

Audiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.

Try Audible free
Amazon Music Unlimited

Ad-free music streaming. Eligible new subscribers can start with a free trial.

Try Music Unlimited free

As an Amazon Associate we earn from qualifying purchases.