Key takeaways
- Find the best hole saws for metal, with bi-metal kits from Milwaukee, Lenox, Bosch, DeWalt, and Spyder covering the sizes fab shops reach for most.
What's inside
- Quick Answer
- How to Choose
- Milwaukee Hole Dozer Bi-Metal Hole Saw Kit, 17-Piece (49-22-4029)
- LENOX Bi-Metal Hole Saw Kit, 10-Piece (30808600P)
- Bosch HSBIM9 9-Piece General-Purpose Bi-Metal Hole Saw Kit
- DEWALT D180005 14-Piece Master Hole Saw Kit
- Spyder 600886 11-Piece Bi-Metal Hole Saw Kit
- Who Should Skip It
- FAQ
- Final Verdict
- Quick Answer
- How to Choose
- Milwaukee Hole Dozer Bi-Metal Hole Saw Kit, 17-Piece (49-22-4029)
- LENOX Bi-Metal Hole Saw Kit, 10-Piece (30808600P)
- Bosch HSBIM9 9-Piece General-Purpose Bi-Metal Hole Saw Kit
- DEWALT D180005 14-Piece Master Hole Saw Kit
- Spyder 600886 11-Piece Bi-Metal Hole Saw Kit
- Who Should Skip It
- FAQ
- Final Verdict
As an Amazon Associate I earn from qualifying purchases. This post may contain affiliate links at no extra cost to you.
Home › Uncategorized › Best Hole Saws for Metal: 5 Bi-Metal Kits That Cut Clean
Every fab shop needs round holes in metal: pass-throughs in electrical enclosures, gauge and pipe holes in tanks, lightening holes in brackets, and openings in sheet and plate that no twist bit can reach. A bi-metal hole saw on a drill press or mag drill is the standard way to make them without a plasma cutter or a machine shop.
This guide compares five bi-metal kits from the brands fabrication shops actually stock. The things that separate a good kit from a drawer of regrets are tooth material, the size range covered, how the arbor handles stuck plugs, and whether the pilot bits and arbors are shared across the set.
As an Amazon Associate, we earn from qualifying purchases.
What we cover
- Quick Answer
- How to Choose
- Milwaukee Hole Dozer Bi-Metal Hole Saw Kit, 17-Piece (49-22-4029)
- LENOX Bi-Metal Hole Saw Kit, 10-Piece (30808600P)
- Bosch HSBIM9 9-Piece General-Purpose Bi-Metal Hole Saw Kit
- DEWALT D180005 14-Piece Master Hole Saw Kit
- Spyder 600886 11-Piece Bi-Metal Hole Saw Kit
- Who Should Skip It
- FAQ
- Final Verdict
Quick Answer
The Milwaukee Hole Dozer 17-piece kit is the most complete set here, with nine cobalt bi-metal saws. The LENOX 10-piece and Bosch 9-piece kits cover core sizes for less bench space, DEWALT’s 14-piece master kit adds quick-change mandrels, and Spyder’s kit ejects plugs fast between cuts.
How to Choose
Bi-metal is the baseline for steel. A bi-metal saw welds high-speed steel teeth to a flexible alloy body, so it cuts mild steel, aluminum, and sheet stock while surviving the flex and heat of hand-drill use. Cobalt-alloy teeth, found in the Milwaukee and Bosch sets here, hold an edge longer in harder material. For daily stainless work, carbide-tipped saws last longer still, but they cost more and chip if abused.
Buy the size range you actually cut. Most fab work clusters between 3/4 inch and 2-1/2 inches: conduit, pipe, fittings, and hardware pass-throughs. Every kit here covers that span. A kit with more saws in that band beats a giant set padded with sizes you will never mount.
The arbor system decides your frustration level. Plugs wedge inside hole saws, and prying them out with a screwdriver wastes time on every hole. Quick-change mandrels and plug-ejection designs, like Spyder’s Rapid Core Eject, turn a two-minute fight into a two-second step. Also check that one or two arbors serve the whole kit, and that pilot bits are standard replaceable sizes.
Run them right. Hole saws want slow speeds, steady pressure, and cutting oil on steel. A drill press gives the straightest, roundest holes; a hand drill works for field fixes if you start with a pilot dimple and keep the saw square to the work.
Milwaukee Hole Dozer Bi-Metal Hole Saw Kit, 17-Piece (49-22-4029)
The Hole Dozer kit is the most complete set in this guide: 17 pieces built around nine bi-metal hole saws spanning 3/4 inch to 2-1/2 inches, the exact band fabrication shops cut most. The teeth are a cobalt alloy blend aimed at longer life in metal, and the cup design includes plug-access slots that make slug removal less of a fight than plain cups.
Milwaukee’s arbor and pilot bits are shared across the set, and replacement saws in this line are sold individually everywhere, which matters when one size eventually dulls. The case keeps sizes organized instead of rattling in a drawer. For a shop buying one kit to cover enclosures, tanks, and bracket work for years, this is the default recommendation. It is the set the others are compared against on completeness alone.
Specs
| Spec | Value |
|---|---|
| Pieces | 17 |
| Hole saws | 9 |
| Saw sizes | 3/4 to 2-1/2 inches |
| Material | Bi-metal with cobalt alloy teeth |
| Model | 49-22-4029 |
LENOX Bi-Metal Hole Saw Kit, 10-Piece (30808600P)
LENOX built its name on blades, and its hole saws carry that reputation into a compact 10-piece kit aimed at electricians and metalworkers who cut the standard sizes over and over. The bi-metal saws are made to shed heat and resist tooth strippage on steel, and the kit concentrates on the core diameters used for conduit and enclosure work.
This is the smaller-footprint alternative to the Milwaukee set: fewer pieces, less case to store, and the sizes most jobs need. LENOX saws and arbors are stocked widely, so replacements and additions are easy to source. If your hole cutting is mostly electrical boxes, panels, and pipe pass-throughs in sheet and light plate, this kit covers the work without paying for saws that will sit unused.
Specs
| Spec | Value |
|---|---|
| Pieces | 10 |
| Material | Bi-metal |
| Model | 30808600P |
| Brand | LENOX |
Bosch HSBIM9 9-Piece General-Purpose Bi-Metal Hole Saw Kit
Bosch’s HSBIM9 takes a different approach to the arbor problem. Its SpinLOCK universal arbors are designed for fast saw changes and easy plug removal, and the kit includes two of them plus a steel pilot bit. Six saws cover 3/4, 7/8, 1-1/8, 1-1/2, 1-3/4, and 2 inches, a tight, sensible spread for general fabrication and installation work.
The saws use an 8 percent cobalt alloy bi-metal construction with Bosch’s Progressor tooth geometry, which is meant to cut faster and clear chips better in mixed material, metal one minute and wood or plastic the next. Shops that cut across materials on the same job will appreciate that versatility. It is the smallest kit here, and the smart pick when your holes cluster at or under 2 inches.
Specs
| Spec | Value |
|---|---|
| Pieces | 9 |
| Hole saws | 6 |
| Saw sizes | 3/4, 7/8, 1-1/8, 1-1/2, 1-3/4, 2 inches |
| Arbors | 2 SpinLOCK universal arbors |
| Material | Bi-metal, cobalt alloy |
DEWALT D180005 14-Piece Master Hole Saw Kit
DEWALT’s master kit packs 14 pieces, including 11 bi-metal hole saws, which gives it the widest saw count in this guide after the Milwaukee. It ships with both small and large quick-change mandrels, so saw swaps across the full size range stay fast, plus Pilot Point pilot bits that start holes without skating across finished surfaces.
The master-kit format suits shops outfitting a new bench or a service truck: one case with the saws, mandrels, pilot bits, and a replacement parts set inside. DEWALT hole saws are a common sight in industrial supply channels, so individual replacements are easy to match later. Choose this kit if you want broad size coverage and quick-change convenience from a mainstream pro brand, in a case built to live on a truck or cart.
Specs
| Spec | Value |
|---|---|
| Pieces | 14 |
| Hole saws | 11 |
| Mandrels | Small and large quick-change |
| Pilot bits | Pilot Point |
| Model | D180005 |
Spyder 600886 11-Piece Bi-Metal Hole Saw Kit
Spyder built its hole saw line around one annoyance: the plug stuck in the cup. Its Rapid Core Eject arbor lets you pop the core out with a quick shift of the arbor instead of prying, which adds up fast on repetitive holes in sheet and enclosures. This 11-piece kit includes seven saws from 3/4 inch up to 2-1/2 inches, Hex8 and Hex10 arbors, and HSS pilot bits, all in a hard storage case.
The bi-metal cups handle steel, aluminum, and other common shop materials, and the hex arbors seat firmly in standard chucks. For production-style work, rows of identical holes in panels or duct, the ejection system is a genuine time saver rather than a gimmick. It is the kit to pick when plug removal is your current bottleneck.
Specs
| Spec | Value |
|---|---|
| Pieces | 11 |
| Hole saws | 7 |
| Saw sizes | 3/4, 7/8, 1-1/8, 1-1/2, 2, 2-1/8, 2-1/2 inches |
| Arbors | Hex8 and Hex10 |
| Feature | Rapid Core Eject arbor |
| Model | 600886 |
Who Should Skip It
Skip the kit if you only ever cut one diameter; a single saw and arbor costs less and stores easier. If you cut thick plate all day, annular cutters on a magnetic drill make big holes faster and with less heat than hole saws. And if stainless steel is your main material, look at carbide-tipped saws instead, since bi-metal teeth dull quickly in stainless unless speeds stay low and oil flows freely. Hole saws also struggle in very thick stock, where the cup depth and chip clearance run out.
FAQ
Can bi-metal hole saws cut stainless steel?
Yes, with care. Run the saw slowly, use cutting oil, and keep steady pressure so the teeth cut instead of rubbing and work-hardening the surface. Expect shorter tooth life than in mild steel; frequent stainless work justifies carbide-tipped saws.
What speed should a hole saw run in steel?
Slow. Big diameters need very low RPM, far slower than twist-bit speeds, or the teeth overheat and dull. A drill press with a low speed range is ideal. If the chips come out blue, you are running too fast or feeding too lightly.
Why does my hole saw wander at the start?
The rim has nothing to guide it until the teeth bite. Start with the pilot bit in a center-punched mark, hold the drill square, and let the pilot hole establish the track before the cup contacts the surface. A drill press removes most of the problem.
How do I get a stuck plug out of a hole saw?
Use the access slots in the cup wall to lever the plug with a screwdriver, or choose an ejection arbor system like Spyder’s that pushes the core free. Cutting complete holes in one pass and clearing chips between cuts reduces how tightly plugs wedge.
Final Verdict
The Milwaukee Hole Dozer 17-piece kit is the best single purchase for most metal shops, on size coverage and tooth material. The LENOX 10-piece kit trims the same idea down for enclosure and conduit work, the Bosch HSBIM9 adds clever arbors in a compact set, DEWALT’s master kit maximizes saw count and quick changes, and the Spyder kit wins on plug ejection for repetitive holes. Any of the five will cut clean round holes in steel when run slow with oil.
Related guides
Keep reading
- Best Brazing Kits for Metal Repair: Top 5 Torch Kits
- Best Deburring Tools for Metal: 5 Swivel Picks for Shops
- Best Metal Files: 5 Nicholson and Needle File Picks
- Best TIG Welding Accessories: Torch Kits and Tungsten
- Best Drill Presses for Metalworking: 5 Picks for 2026
- Best Magnetic Drills for Steel: 5 Portable Picks 2026
More from Amazon
Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.
A free business account with business pricing and bulk-buying tools for work, shop or home office.
Create a business accountFree shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.
Start a Prime free trialAudiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.
Try Audible freeAd-free music streaming. Eligible new subscribers can start with a free trial.
Try Music Unlimited freeAs an Amazon Associate we earn from qualifying purchases.
Write Your Review
No reviews yet. Be the first to share your experience!