Updated Nov 19, 2026· 10 min read

Our Top Picks

  1. WORKESS Metal Welding Table Folding 1000 lbs LoadWB06521 x 42 x 36.6 Inches41.9 pounds
    Check on Amazon
  2. VEVOR Welding Table 36"x18"36" x 18"36 x 18 x 35 Inches57 pounds
    Check on Amazon

As an Amazon Associate I earn from qualifying purchases. This post may contain affiliate links at no extra cost to you.

If floor space is the limiting factor in your shop, the best folding welding table is the WORKESS Folding Welding Table (WK-WB065): it carries a 1,000-pound rating, adjusts through seven height levels, and folds nearly flat for storage. For a rolling station with storage, the Goplus 36 x 18 Rolling Welding Table is the stronger pick, while the VEVOR Foldable Welding Table (WT400) is the budget-friendly choice that tilts, rolls, and hangs on a wall hook when the job is done. Below, five folding and portable tables are compared on tabletop size, fixture holes, load capacity, and folded footprint, so a small workshop can keep a real steel work surface without giving up a parking space to it.

As an Amazon Associate, we earn from qualifying purchases.

What we cover
  1. Table of Contents
  2. Quick Picks
  3. WORKESS Folding Welding Table (WK-WB065)
  4. Goplus 36 x 18 Rolling Welding Table
  5. VEVOR Welding Table 36 x 24 with Fixture Holes
  6. VEVOR Welding Table 36 x 18 on Wheels
  7. VEVOR Foldable Welding Table 30 x 20 (WT400)
  8. How to Choose a Folding Welding Table
  9. FAQ
  10. Conclusion

Table of Contents

Quick Picks

  • Best overall: WORKESS Folding Welding Table (WK-WB065) — 1,000-pound capacity, seven height levels from 27.7 to 36.6 inches, folds to about 3.7 inches thick.
  • Best rolling station: Goplus 36 x 18 Rolling Welding Table — 800-pound tabletop rating, storage shelf and tool tray, lockable casters.
  • Best fixture-hole top: VEVOR Welding Table 36 x 24 — 800-pound capacity with a 0.63-inch fixture hole grid across the full top.
  • Best heavy capacity on wheels: VEVOR Welding Table 36 x 18 — 1,200-pound rating, two-layer design, braking casters.
  • Best budget folder: VEVOR Foldable Welding Table WT400 — tilting slotted top, retractable guide rails, two wheels, 34.8-pound carry weight.

WORKESS Folding Welding Table (WK-WB065)

Check price on Amazon

The WORKESS WK-WB065 is the most complete folding package in this group. The frame is heavy-duty steel with a powder-coated finish, and the published rating is 1,000 pounds evenly distributed, which puts it well ahead of most tables that fold. Height adjusts through seven levels between 27.7 and 36.6 inches, so the same table works for seated TIG work at the low settings and standing MIG or grinding work at the top of the range.

Storage is where this design earns its place in a small workshop. Folded, the table is only about 3.7 inches thick, slim enough to slide between a wall and a cabinet or hang flat behind a door. That matters in a one-car garage where a fixed table would permanently consume the space a car, a mower, or a workbench needs the rest of the week.

The trade-off is clamping flexibility. The WORKESS top does not use a dense fixture-hole grid, so workholding relies on edge clamps and magnetic squares rather than drop-in fixture pins. For repair work, gates, brackets, and general fabrication, that is a workable arrangement, and the capacity and height range are the strongest in this roundup. It sits in the mid-range tier.

Specs

  • Model: WK-WB065
  • Load capacity: 1,000 lb, evenly distributed
  • Height adjustment: 7 levels, 27.7 to 36.6 in
  • Folded thickness: about 3.7 in
  • Construction: heavy-duty steel frame, powder-coated finish
  • Tier: mid-range

Goplus 36 x 18 Rolling Welding Table

Check price on Amazon

The Goplus rolling table is built as a mobile welding station rather than a bare top. The 36 x 18 inch electroplated steel tabletop is rated at 800 pounds, and a grid of 5/8-inch fixture holes with slots gives clamps and stops plenty of anchor points. Underneath, a bottom shelf rated at 400 pounds holds a welder or plasma cutter, and a tool tray rated at 66 pounds keeps consumables off the work surface. Total system capacity is 1,200 pounds.

With the tray fitted, the overall length is 50.5 inches, so measure the parking spot before ordering. The table itself weighs 45.5 pounds and rolls on lockable casters, which makes it easy to pull into the middle of the floor for a project and push back against the wall afterward. Assembly is required out of the box.

For a small workshop that needs the welder, the table, and hand tools to live in one footprint, this is the most organized option here. The electroplated finish resists rust in damp garages, and the hole grid supports repeatable setups for batch work like railings and frames. It is the premium pick in this group.

Specs

  • Tabletop: 36 x 18 in, electroplated steel
  • Tabletop capacity: 800 lb; total capacity 1,200 lb
  • Bottom shelf capacity: 400 lb; tool tray capacity: 66 lb
  • Fixture holes: 5/8 in grid with tool slots
  • Overall length with tray: 50.5 in
  • Net weight: 45.5 lb
  • Mobility: lockable casters
  • Tier: premium

VEVOR Welding Table 36 x 24 with Fixture Holes

This VEVOR model is the fixturing specialist of the group. The 36 x 24 inch carbon steel top is drilled with a grid of 0.63-inch fixture holes, the common 5/8-inch class size, so standard fixture clamps, stops, and squares drop in across the whole surface. The galvanized finish shrugs off spatter and resists corrosion, and the published load rating is 800 pounds.

At 36 x 24 inches, the top is the widest in this roundup, which helps with sheet work, exhaust sections, and small frames that overhang narrower tables. Non-slip foot pads keep it planted on smooth concrete, and the working height is 30.9 inches. This is a fixed-leg table rather than a folder, so it suits a workshop that can dedicate a modest corner to a permanent station and wants real fixturing ability in return.

Repeated setups are the reason to choose it: pin a stop, clamp the parts, and the second, third, and tenth assemblies come out the same. It sits in the mid-range tier.

Specs

  • Model: 800lb-1
  • Tabletop: 36 x 24 in, carbon steel, galvanized finish
  • Load capacity: 800 lb
  • Fixture holes: 0.63 in diameter grid
  • Overall dimensions: 36 x 24 x 30.9 in
  • Feet: non-slip foot pads
  • Tier: mid-range

VEVOR Welding Table 36 x 18 on Wheels

Check price on Amazon

The second VEVOR entry trades tabletop width for capacity and mobility. The 36 x 18 inch top carries a 1,200-pound rating, the highest in this roundup, and the top is drilled with 94 fixture holes in the 5/8-inch size alongside four tool slots. A two-layer layout adds a lower shelf for a machine or material storage, and the carbon steel frame has a rust-prevention surface treatment.

Four casters with brakes let one person reposition the table, then lock it down for work. That combination suits small workshops that double as garages: roll the table out, weld, and roll it back so the bay is clear. The narrower top means long parts will overhang, which is manageable with a roller stand or a second support for outboard ends.

Published specifications list the load rating for the table as a whole, so heavy point loads should still be kept near the legs. For engine stands, axle work, and heavy brackets in a tight space, this is a strong mid-range option.

Specs

  • Tabletop: 36 x 18 in, carbon steel
  • Load capacity: 1,200 lb
  • Fixture holes: 94 holes, 5/8 in, plus 4 tool slots
  • Design: two-layer with lower storage shelf
  • Casters: 4, with brakes
  • Frame: carbon steel with rust-prevention treatment
  • Tier: mid-range

VEVOR Foldable Welding Table 30 x 20 (WT400)

Check price on Amazon

The WT400 is the lightest and most portable table here. Built from Q235 carbon steel, it weighs 34.8 pounds, rolls on two wheels with a pull handle, and folds flat for storage or transport. The 30 x 20 inch top has three 1.1-inch slots running its length, so clamps can be positioned along the slot rather than only at hole points, and retractable guide rails act as stops or clamping edges.

The top tilts to three angles, flat, 30 degrees, and folded upright, and the height adjusts through five levels from 26.2 to 35.6 inches. The 400-pound capacity is the lowest in this roundup, which limits it to light fabrication, tubing work, and repair jobs rather than heavy assemblies. For apartment garages, shared spaces, and mobile repair work, that trade is usually worth it: this is the one table here that can genuinely live in a closet.

It is the budget pick in this group, and the natural choice when storage space matters more than load rating.

Specs

  • Model: WT400
  • Tabletop: 30 x 20 in, Q235 carbon steel
  • Load capacity: 400 lb
  • Slots: three 1.1 in tabletop slots; retractable guide rails
  • Tilt positions: flat, 30 degrees, folded
  • Height adjustment: 5 levels, 26.2 to 35.6 in
  • Weight: 34.8 lb; two wheels with pull handle
  • Tier: budget

How to Choose a Folding Welding Table

Start with the storage footprint, not the work surface. In a small workshop, the folded size decides whether a table gets used or gets sold. Measure the slot the table will live in: a folder like the WORKESS at about 3.7 inches thick fits behind doors and between cabinets, while a rolling station like the Goplus needs a clear parking rectangle of roughly 50 by 20 inches. If neither fits, a lightweight tilt-top design that hangs on a wall is the realistic option.

Match the clamping system to the work. Fixture-hole grids in the 5/8-inch class accept the widest range of drop-in clamps, stops, and squares, and they shine on repeated assemblies. Slotted tops, like the WT400, accept clamps anywhere along the slot but offer fewer indexing points. Plain tops need edge clamps and magnets. None is wrong; repeated frame work favors holes, one-off repairs favor slots or plain tops.

Read the load rating carefully. Published capacities assume the load is spread evenly. A 1,000-pound rating does not mean a 1,000-pound point load at the center of the span. Keep heavy weldments over the legs, and treat the rating as a ceiling for distributed weight, including the workpiece, clamps, and anything stored on lower shelves.

Check height range against how you work. Seated TIG work is comfortable around 28 to 30 inches; standing fabrication is usually better at 34 to 36 inches. Tables with five to seven height levels cover both. Fixed-height tables around 31 to 36 inches are simpler and stiffer, so choose adjustability only if the shop is shared or the work varies.

Plan the ground path. A steel top makes a convenient ground clamp point, but paint and galvanized coatings can interrupt the connection. Clamp the work lead to the workpiece itself, or to a clean bare-metal spot on the top, and keep spatter cleaned off so the surface stays flat and conductive where it counts.

FAQ

Will a folding welding table stay flat enough for frame work?

For hobby and light fabrication work, yes. The tops in this roundup are steel plate or formed steel rated for their published loads, and small gaps are handled the same way as on any table: shim the workpiece, clamp it to stops, and tack in a sequence that pulls the joint square. For production fixturing with tight tolerances, a machined fixed table is the better tool, but that class of table does not fold.

What size tabletop suits a small workshop?

A 36 x 18 or 36 x 24 inch top covers most brackets, frames, exhaust work, and furniture projects while still parking against a wall. Go smaller, at 30 x 20 inches, only when storage is the overriding constraint. Long parts can overhang any of these tops safely with a roller stand supporting the free end.

Are 5/8-inch fixture holes a standard size?

Yes. Holes at 0.63 inch, sold as 5/8-inch or 16 mm class, are the common size on hobby and mid-range fixture tables, and clamps, pins, and stops are widely available for them. Check the hole diameter before buying accessories, because a few tables use smaller or non-standard holes that limit accessory choice.

Can a folding table handle a welder stored on it?

Only where the design provides for it. The Goplus rolling table publishes separate ratings for its tabletop, bottom shelf, and tool tray, so a machine on the shelf is within the design. Folding tabletops without a shelf are not storage furniture; fold them empty, and keep the welder on its own cart or shelf.

Conclusion

Small workshops do not have to choose between a real steel work surface and a usable floor. The WORKESS WK-WB065 is the best all-around folding table here, pairing a 1,000-pound rating with seven height levels and a genuinely slim folded profile. The Goplus rolling table adds the storage and fixture grid that turn a table into a complete station. VEVOR covers the remaining needs: the 36 x 24 model for fixture-hole work at a fixed station, the 36 x 18 model for heavy loads on casters, and the WT400 for anyone whose table has to disappear into a closet. Match the folded footprint to the space first, then the clamping system to the work, and any of the five will serve a small shop well.

H
Hoodlum Welding Editorial Team
We compare specs, warranty terms, long-term owner feedback and street pricing before anything earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.
Best Folding Welding Tables for Small Workshops 2026Check price on Amazon

Related guides

Browse all Uncategorized guides →

More from Amazon

Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.

Amazon Business

A free business account with business pricing and bulk-buying tools for work, shop or home office.

Create a business account
Amazon Prime

Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.

Start a Prime free trial
Audible

Audiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.

Try Audible free
Amazon Music Unlimited

Ad-free music streaming. Eligible new subscribers can start with a free trial.

Try Music Unlimited free

As an Amazon Associate we earn from qualifying purchases.