Key takeaways
- Compare the best switchable welding magnets for metal fabrication, with on/off control, pull force specs, angle options and fixture-ready picks.
What's inside
- Table of Contents
- Quick Picks
- Strong Hand Tools Adjust-O MSA45: Best Switchable Welding Square
- Magswitch MagJig 150 (Set of 2): Best for Shop-Built Fixtures
- Magswitch MagJig 95: Best Compact Fixture Magnet
- Magnetpro Multipurpose Switch Magnet 660 lb: Best Heavy-Duty Switch Magnet
- Strong Hand Tools MLA600: Best for Odd Angles
- How to Choose a Switchable Welding Magnet
- FAQ
- Conclusion
- Table of Contents
- Quick Picks
- Strong Hand Tools Adjust-O MSA45: Best Switchable Welding Square
- Magswitch MagJig 150 (Set of 2): Best for Shop-Built Fixtures
- Magswitch MagJig 95: Best Compact Fixture Magnet
- Magnetpro Multipurpose Switch Magnet 660 lb: Best Heavy-Duty Switch Magnet
- Strong Hand Tools MLA600: Best for Odd Angles
- How to Choose a Switchable Welding Magnet
- FAQ
- Conclusion
As an Amazon Associate I earn from qualifying purchases. This post may contain affiliate links at no extra cost to you.
Home › Uncategorized › Best Switchable Welding Magnets for Metal Fabrication
A switchable welding magnet solves the two biggest annoyances of a standard arrow magnet: it lets you slide steel parts into exact position with the magnetic field turned off, and it releases cleanly after the tack instead of needing to be pried loose. Switching the field off also drops the grinding dust and steel chips that an always-on magnet collects, so the contact faces stay cleaner and keep their grip. For fabrication work such as frame fit-up, bracket placement and shop-built fixtures, that control is the main reason to choose one of the magnets below over a fixed magnet. As an Amazon Associate, we earn from qualifying purchases.
The short answer: the Strong Hand Tools Adjust-O MSA45 is the most direct replacement for a traditional welding square, the Magswitch MagJig 150 and MagJig 95 are the picks for building switchable clamping into your own fixtures, and the Magnetpro 660 lb switch magnet covers heavy positioning and lifting tasks. One adjustable-angle alternative is included for joints that no fixed-angle switchable magnet can reach.
What we cover
- Table of Contents
- Quick Picks
- Strong Hand Tools Adjust-O MSA45: Best Switchable Welding Square
- Magswitch MagJig 150 (Set of 2): Best for Shop-Built Fixtures
- Magswitch MagJig 95: Best Compact Fixture Magnet
- Magnetpro Multipurpose Switch Magnet 660 lb: Best Heavy-Duty Switch Magnet
- Strong Hand Tools MLA600: Best for Odd Angles
- How to Choose a Switchable Welding Magnet
- FAQ
- Conclusion
Table of Contents
- Quick Picks
- Strong Hand Tools Adjust-O MSA45
- Magswitch MagJig 150 (Set of 2)
- Magswitch MagJig 95
- Magnetpro Multipurpose Switch Magnet 660 lb
- Strong Hand Tools MLA600
- How to Choose a Switchable Welding Magnet
- FAQ
- Conclusion
- Product and ASIN Reference
Quick Picks
- Best switchable welding square: Strong Hand Tools Adjust-O MSA45, a 45 and 90 degree square with an on/off switch and a mid-point position for fine placement.
- Best for shop-built fixtures: Magswitch MagJig 150 (Set of 2), switchable clamps made to drop into drilled fixtures and fences.
- Best compact fixture magnet: Magswitch MagJig 95, the smaller MagJig for lighter jigs and stops.
- Best heavy-duty switch magnet: Magnetpro Multipurpose Switch Magnet 660 lb, a budget-tier on/off magnet rated for positioning and light lifting.
- Best for odd angles: Strong Hand Tools MLA600, an adjustable magnet covering 30 to 270 degrees; the one pick without a switch, included because no switchable model offers that angle range.
Strong Hand Tools Adjust-O MSA45: Best Switchable Welding Square
The MSA45 is the closest match to the classic red arrow magnet, upgraded with a switch. Its faces hold workpieces at 45 and 90 degrees, with additional 30 and 60 degree reference faces, and the on/off switch includes a mid-point position that weakens the field so parts can be nudged into alignment without fighting full pull. Once the joint is set, the switch goes fully on for tacking, then fully off so the magnet lifts away without dragging the parts out of position.
Strong Hand Tools rates the MSA45 at 65 lb of maximum pull force, measured with the longest side of the magnet against steel plate 3/8 inch thick. That is enough holding power for the square tubing, angle iron and plate used in typical bench fabrication. The manufacturer is explicit that the Adjust-O range is for tack welding only: the magnet comes off before the joint is welded out, and it should be kept away from prolonged heat above 175 degrees F, which protects the rare-earth magnets inside. It is a mid-range pick.
Specs
- Maximum pull force: 65 lb on 3/8 inch steel
- Holding angles: 30, 60, 45 and 90 degrees
- Switch: on/off with mid-point position for part placement
- Dimensions: 4.4 x 3.8 x 1 inches
- Weight: 1.0 lb
- Magnet type: rare earth
- Use limit: tack welding only, remove before completing the weld
Magswitch MagJig 150 (Set of 2): Best for Shop-Built Fixtures
MagJig clamps take a different approach from a welding square. Instead of holding two parts at an angle, a MagJig drops into a hole drilled in a shop-made fixture, fence, stop or jig and clamps that fixture down to a steel table with switchable force. The rotating knob turns the magnet fully on or fully off, so a fixture can be repositioned in seconds and removed without tools. This set includes two MagJig 150 units, and using a pair along a fence or stop is the intended way to build a repeatable setup.
Magswitch rates the MagJig 150 at 150 lb of tensile strength, with a catalog maximum breakaway force of 133 lb on thick steel and a 2-to-1 shear working load of 15 lb. Each unit has a 3/4 inch standoff so it mounts flush in material of that thickness, plus screw holes for fixing it permanently into a fixture. This is the premium pick in the roundup, aimed at fabricators who build dedicated jigs for repeated parts, such as frame rails, gates or production brackets, where the same setup is clamped and released many times a day.
Specs
- Quantity: set of 2 clamps
- Tensile strength: 150 lb
- Maximum breakaway force: 133 lb on 1 inch steel
- Shear working load: 15 lb at a 2-to-1 ratio
- Standoff: 3/4 inch for flush fixture mounting
- Mounting: screw holes for permanent fixture installation
- Dimensions: 2.47 x 3.46 x 1.67 inches per unit
Magswitch MagJig 95: Best Compact Fixture Magnet
The MagJig 95 is the smaller sibling of the MagJig 150, built on the same idea: drill a mounting hole in a fixture, drop the unit in, and turn the knob to clamp the fixture to any steel surface. It suits lighter duties such as drill press stops, small positioners, guides and one-off holding jigs where the larger 150 model would be more clamp than the job needs. Because the magnet switches fully off, the fixture lifts away cleanly and does not drag steel chips across the table.
The current Magswitch specification sheet for the MagJig 95 lists a maximum breakaway force of 68 lb, and the product manual rates each unit at up to 15 lb of shear force under ideal conditions. Like the 150, it has a 3/4 inch standoff for flush mounting and screw holes for a permanent install, and it weighs only about 0.2 lb. It sits in the mid-range tier: a sensible first MagJig for a small shop that wants switchable fixturing without committing to the larger set.
Specs
- Maximum breakaway force: 68 lb
- Shear rating: up to 15 lb per unit
- Standoff: 3/4 inch for flush fixture mounting
- Mounting: screw holes for permanent fixture installation
- Weight: about 0.2 lb
- Switch: rotating on/off knob, no power source required
- Model number: 8110004
Magnetpro Multipurpose Switch Magnet 660 lb: Best Heavy-Duty Switch Magnet
The Magnetpro switch magnet is a different tool from the squares and fixture clamps above. It is a rectangular switchable magnet block with a rotating handle and two switch positions, on and off, designed for positioning heavy steel, light lifting, machining setups and metal separation. Magnetpro rates it at 660 lb of pull-off force and a rated safe lifting weight of 220 lb, a different class from fit-up magnets: this is the pick for moving and holding plate, not for squaring a frame corner.
The body measures 3.54 inches across, and the June 2025 revision of the design reduced the force needed to rotate the handle, according to the listing. In a fabrication shop it fits jobs such as holding plate steady for layout, positioning parts on a machining table, or picking up offcuts with the field on, then releasing them over a bin with the field off. It is the budget-tier option in this roundup. Keep in mind that its pull rating is a straight pull-off figure on thick, clean steel, and it offers no angle faces, so it complements rather than replaces a welding square.
Specs
- Rated pull-off force: 660 lb
- Rated safe lifting weight: 220 lb
- Size: 3.54 inches
- Switch: two-position on/off rotating handle
- Magnet material: neodymium
- Intended uses: lifting, machining and welding positioning, metal separation
- Part number: MSW-300
Strong Hand Tools MLA600: Best for Odd Angles
Every switchable magnet in this roundup holds fixed angles or clamps flat to a surface. When a joint falls at an angle like 40 or 160 degrees, none of them can set it, which is why the MLA600 earns a place here with one trade-off stated up front: it is an always-on magnet with no on/off switch. In exchange, its two magnet faces pivot and lock at any angle from 30 to 270 degrees, set with an angle pin, covering the mitered and skewed joints that fixed squares cannot.
Strong Hand Tools rates the MLA600 at 33 lb of pull force, and it carries magnets on both the inside and outside faces, so it can hold parts from either side of a joint. The body is 6 inches long. That pull figure is modest next to the MSA45, so the MLA600 is a positioning aid for tacking lighter sections rather than a clamp for heavy plate, and like all always-on magnets it will collect chips and needs a wipe-down. It is a mid-range pick for fabricators whose work regularly leaves the 45 and 90 degree world, and it pairs well with a switchable square handling the standard corners.
Specs
- Pull force: 33 lb
- Angle range: 30 to 270 degrees, adjustable
- Angle setting: locking pin
- Magnet placement: inside and outside faces
- Size: 6 inches
- Switch: none, always-on design
- UPC: 679352007861
How to Choose a Switchable Welding Magnet
Start with the job shape. For squaring two parts at 45 or 90 degrees, choose a switchable square such as the MSA45. For repeatable setups on a steel table, choose fixture clamps such as the MagJigs and build them into your own fences and stops. For moving or steadying plate, choose a heavy switch magnet such as the Magnetpro. For non-standard angles, an adjustable magnet is the only option, and it means giving up the switch.
Next, read pull ratings carefully, because brands measure them differently. A pull or breakaway figure is recorded on thick, clean, flat steel with full face contact. The same magnet on thin sheet, painted steel or a round tube holds far less, and shear force, the sideways load that matters when a part hangs off a magnet, is always much lower than the breakaway number. Strong Hand Tools bases its figures on 3/8 inch steel, while Magswitch publishes separate breakaway and shear values, so compare like with like.
Then check the heat and duty limits. Fit-up magnets are positioning tools for tacking, not clamps to weld against. The MSA45 is rated for tack welding only and must come off before the joint is finished, and rare-earth magnets lose strength when overheated, so keep any magnet away from the arc and from prolonged heat. Finally, consider the switch itself: a mid-point position, like the one on the MSA45, makes fine alignment easier, while a simple two-position knob is faster for fixture work where the magnet switches on and off many times a day.
FAQ
What does a switchable welding magnet do that a regular magnet cannot?
It turns its magnetic field on and off mechanically. With the field off, parts slide into position without resistance and the magnet can be placed where it belongs. Switched on, it holds for tacking. Switched off again, it releases without prying and drops the steel chips it picked up, keeping the contact faces clean.
How much pull force do you need for tacking steel parts?
For bench work with tubing, angle and plate up to about 3/8 inch thick, a magnet rated between 33 and 90 lb of pull is generally enough for tacking, since clamps or gravity usually share the load. Published figures assume thick, clean, flat steel, so expect less grip on thin, painted or curved material and size up when in doubt.
Can you weld a full joint while the magnet is still attached?
For fit-up magnets such as the Adjust-O range, no. The manufacturer rates them for tack welding only and directs users to remove the magnet before completing the weld. Staying attached exposes the magnet to heat that weakens rare-earth magnets, and a strong field near the arc can disturb arc stability.
Do switchable magnets work on thin sheet metal?
They grip, but with much less force than the headline rating. Holding force depends on the steel being thick enough to complete the magnetic circuit, and thin sheet saturates quickly, so a magnet rated at 150 lb on thick plate may hold only a fraction of that on body-panel gauge steel. On thin material, use the magnet for positioning and add mechanical clamps for security.
Conclusion
Switchable magnets earn their place in a fabrication shop by doing the two things fixed magnets do badly: placing parts precisely and letting go cleanly. The MSA45 is the best all-round switchable square for everyday fit-up at 45 and 90 degrees. The MagJig 150 pair and the compact MagJig 95 turn switchable clamping into a fixture system for repeat work. The Magnetpro 660 lb switch magnet covers heavy positioning and light lifting at a budget tier, and the MLA600 fills the odd-angle gap for fabricators willing to trade the switch for a 30 to 270 degree range. Match the magnet style to the joint, and read the pull ratings with their test conditions in mind.
Related guides
Keep reading
More from Amazon
Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.
A free business account with business pricing and bulk-buying tools for work, shop or home office.
Create a business accountFree shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.
Start a Prime free trialAudiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.
Try Audible freeAd-free music streaming. Eligible new subscribers can start with a free trial.
Try Music Unlimited freeAs an Amazon Associate we earn from qualifying purchases.
Write Your Review
No reviews yet. Be the first to share your experience!